My Bustled Fiery FS200 Versant only shows 00 for ca 5 minutes and
then they go off so i cant connect my computer anay help apprieated thanks
Hi,
Check/revert the SVGA cables and if this not solve the issue it could be from the Fiery power supply.
Gabi
Thanks for answear we tried connect another rip Freeflow and got these answeares
printer device inactive, c16352, printer initializing, it seems not getting connection
to the machine can you help me out out with this thanks
It could be a bad RIP board, but try to remove and reconnect that board.
We connected my rip to anther Versant and it worked fine so it much
be something in my machine not working right do you have clue
what that can be thanks ?
In this case it is obviously the Halftone PWB is defective. We've had, about one month ago, something like this and by replacing that board the problem has solved.
Thanks again for helping but i can copy on the machine, is there any method to test if this board is defective ?
Hi,
You can swap that board from another machine (of course with help of a tech) if is possible.
My tech came opened the machine and touch some connectors and then connected the rip and all fine :-) thanks for your assitance best from iceland