Ohcf lift rope

[ahmetturan · Accepted solution]

These are the parts that i used. 

[ahmetturan]

I want to update this topic.

I chanced the ropes of my OHCF wich works with xerox 560. I can only say that; just don't try it if don't know. I'm not a CE but i made it by my self twice without getting support. I forget part numbers maybe i will write it tomorrow or so.

[Joe Arseneau · Accepted solution]

Assuming it is this thingy

Then it will be Part Number 604K19981 (Tray Pulley Cable)

[ahmetturan]

I'm runing this device with xerox 560 in Turkey and i dont want any misunderstanding, i just need the set of rope for lifting mechanism.

Thank a lot for all...

[Joe Arseneau]

There are at a minimum 10 completely different OHCF units.

If you want help, you need to provide the tray model, the printer it hooks to, the area in the world it was sold etc.

[ahmetturan]

Hello,
My ohcf lifting rope has break down. I already cleaned up broken rope parts. I need new set of rope but i don't know part code of it.

Images of ropes https://i.hizliresim.com/4G11j0.jpg
https://i.hizliresim.com/AynnD7.jpg