Phaser 4510

[danny]

a video instructions that shows me step by step would be fantastic.

[danny]

i received the part today 130K63603, XEROX 4500 SENSOR TONER ASSEMBLY

need instructions please

[JohnM-Xerox]

I've asked around and unfortunately, we do not have any documentation for this procedure.  You might be better off taking the new part to the nearest Xerox Authorized Service Provider for installation.  I'm sorry that I couldn't be of any more help.

John

[danny]

i can't take it to the service provider. this is a business printer and i am the technican to install the part. please any help would do.

[JohnM-Xerox]

danny, I wish I could help, but I've spoken to the engineers and they don't have any documentation that I could provide for you.  I'll ask again and see if there's anything that they can do to help.

[danny]

ok thanks

[JohnM-Xerox]

I'm sorry danny, there is no service documentation available at this time for that sensor.  I wish that I could do more for you.

[danny]

Remove the print cartridge and leave the top cover open. Protect the print
cartridge from light exposure.
Note
Before proceeding, remove the 150-sheet paper cassette and feed a
sheet of paper partially into the registration roller to catch the
tensioning spring if it falls.
2. Unplug the connector (P/J220) of the toner sensor from the toner harness
assembly 1.
3. Release the wires from the cable restraints.
4. Rotate the sensor D-holder to its vertical position, noting the orientation of
its tensioning spring.
5. Slide the holder to the left to release the hinge pins from the feeder
assembly.
Note
When removing the toner sensor assembly, be careful not to lose the
holder tension spring.

[danny]

is this the instructions to the sensor? ido you know if any easier step by step than this?