cancel
Showing results for 
Search instead for 
Did you mean: 
mommygonzo New Member
New Member

Phaser 8560DX Error codes

I have a Xerox 8560DX phaser, that is refusing to completely warm up. It gets to 16% and then reboots itself after displaying an error code. I can not locate the meaning of the error code and am hoping someone here can help me out

 

07,010,43:14011 is the error code and on the website all it says is to turn off the printer and contact technical support.

 

I think this problem is related to the preheater/heater unit but can't confirm it at all.

0 Kudos
6 Replies
Highlighted
Fabio Valued Advisor
Valued Advisor

Re: Phaser 8560DX Error codes

you need indeed a technician :

 

more info :

 

The 7,010.43 error code indicates the printer is having difficulty tilting the printhead forward from the parked position to the print position. There are several printer systems involved in tilting the printhead so troubleshooting the error can be challenging. The printer does not directly sense the printhead's tilting position. Instead it applies drive current to the process drive motor, and monitors the motion of the motor's rotation encoder for "following error". For a particular drive voltage the encoder should rotate at a particular rate as the printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure.

randyf New Member
New Member

Re: Phaser 8560DX Error codes

I'm receiving and error code 08,035,42:40799 from Phaser 8560 and it's jamming alot.

What's this error code for?

 

Thanks.

0 Kudos
Fabio Valued Advisor
Valued Advisor

Re: Phaser 8560DX Error codes

see this, its best to call and ask for an engeneer :

 

http://www.support.xerox.com/support/8560/support/en_US.html?objGUID=2647

0 Kudos
purephoria New Member
New Member

Re: Phaser 8560DX Error codes

What is the meaning of error code (07 010 43 120165)?

 

Thanks

0 Kudos
epigrafo New Member
New Member

Phasher 8500 Error

I have a Xerox 8500 phaser, that is refusing to completely warm up. It gets to 16% and then reboots itself after displaying Printer Error Press 08,007.41:7852

0 Kudos
LaBete New Member
New Member

Re: Phasher 8500 Error

From the Service Manual: 8,007.41: The Wiper stalled finding home

For an 8,007.41 error: Check for a missing KL-clip securing the Head Maintenance Clutch. Replace if missing.

0 Kudos