cancel
Showing results for 
Search instead for 
Did you mean: 
alan.frth Frequent Member
Frequent Member

Printer shutting down

Product Name: VersaLink C7030
Operating System: Not Applicable

Good afternoon all,

I have a VersaLink C7030 that shuts itself down. The users report that when they try to print they get a "printer offline" message, go into the room where the printer lives and find that the glowing power button is indeed not glowing but off. They then have to hard-start the machine. This has happened since the machine was delivered about 10 days ago.The plug has been tested with a VOM and voltage is good. Lights in the room are controlled over ethernet and turn off after a period of time. With the lights turned manually off the circuit/power for the printer shows good.

I've changed with the power configuration as follows:

1. Low Power Timeout = 30   2. Sleep Timeout = 30

2. Low Power Timeout = 0   2. Sleep Timeout = 60 

1. Low Power Timeout = 60   2. Sleep Timeout = 0   (current config)

Auto Power Mode = OFF for all configurations

Done a little research and found that the NIC and or a circuit board may have been jostled loose in transport to our location. If no solution suggested works will have authorized tech come out and have a look.

Thanks

0 Kudos
2 Replies
Technical Escalation User DavidX28897-xrx
Technical Escalation User

Re: Printer shutting down

Have tech reseat ui ribbon cable
0 Kudos
Highlighted
alan.frth Frequent Member
Frequent Member

Re: Printer shutting down

Hi David,

I'll pass that along to my supervisor. Appreciate your time! Will report back with what he finds.

0 Kudos