cancel
Showing results for 
Search instead for 
Did you mean: 
Valued Member
Valued Member

Problem with Office Finisher LX

Product Name: WorkCentre 7830i/7835i/7845i/7855i

Machine is 7855 with firmware 073.040.075.34540 with the office finisher LX. Finisher will not accept custom paper size 7.2 x 14. When the finisher is selected for the output the system ignores the finisher and delivers to the machine output center tray instead.

Have tried loading the paper in by-pass tray and also Tray 1. Same problem.

All specs from Xerox inidicate this finisher will support this paper size. Any suggestions will be appreciated,

Thanks in advance.

0 Kudos
1 Reply
Highlighted
Analyst Nation Moderator
Analyst Nation Moderator

Re: Problem with Office Finisher LX

Since you are about 5 years from current firmware, try updating to see if it fixes the issue. I can't test it since all the test labs are unmanned and everyone has to work from home (My job is/was in a test lab)

Firmware

Firmware tool installer

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe