Problem with connect to CWIS on Xerox WC550 with Fiery

[Manassasralph]

Joe, I have a V180, but I think the issue is the same as the one you solved with the Xerox 560.

I followed your instructions; 1) Ethernet speed=Auto 2)IP address resolution=STATIC 3)IP address=100.100.100.101 4) Subnet=255.255.255.0 5)Gateway=100.100.100.102 6) DNS=100.100.100.102 7) Reboot

Machine status confirms, IP address 100.100.100.101

Next enter Fiery IP address (192.168.1.34), gets to the WebTools page.  Bottome right=Xerox Versant 180 Press

I'm still getting "503 Service Unavailable".

Please help, I am desperate,

Ralph

[CarlosG02119-GIS]

Awesome! This worked for me. i downloaded the pdf.  Thank You

[gigi1988]

Thank you, Joe. It`s work)

[Joe Arseneau · Accepted solution]

If you modified the default repository then the whole scan setup will be inoperable, the default repository cannot be changed when their is a Fiery.

So make sure the default repository and template pool both match the following:

Protocol............................................................... FTP

o        Host Name / IP Address.................................... 100.100.100.102

o        Port...................................................................... 21

o        File Path.............................................................. <blank>

o        Login Name........................................................ template (lower case)

o        Password............................................................. fX7eWp1a7e (case sensitive)

Once that is complete and after a reboot, combined with the settings in the PDF above, the Fiery logo will come back and work fine.

Then create a new repository and have it go to your 192.168.1.222 location

Check the attached pdf

[gigi1988]

It,s work.
Thank you, Joe.
Please, help me. How i can configuration network scan?
I create repository settings in file repository setup.
But machine cannot save into my network directory.
My PC with network directory have IP 192.168.1.222. Fiery have IP 192.168.1.200, machine have ip 100.100.100.101.

Also i have problem with open Fiery icon on display machine. I see error "Browser error. Custom modes can not be used". Sorry fo my English)

[Joe Arseneau · Accepted solution]

When connected via crossover are you then going to 100.100.100.101?

Your results are what we typically see when the copier is DHCP and fails to retrieve the IP address, or when someone statically assigns the Fiery IP to the copier.

If this seems relevant to your scenario, try running through the attached pdf to regain control of the copier through the Fiery.

[gigi1988]

On this link i see "Service Temporarily Unavailable"

[MikeAXEY2C-AA]

Try http://192.168.1.200:8080

[gigi1988]

Hello!

Sorry for my English.

I have problem with Xerox WC550 with Fiery.

I cannot connect to CentreWare Internet Service.

On Fiery and on machine ip adress is 192.168.1.200.

I can connect to Fiery webtools by ip 192.168.1.200, but when i clicked on link "Xerox CentreWare" i see "Service Temporarily Unavailable".

I connected my network cable into Fiery. Fiery connected with WC550 by crossover cable.

I can connect to CWIS only when i connected my network cable into WC550.