SIQA Alignment of Heavyweight Stock

[Tony_H]

Thanks MRCAnalyst,
Really appreciate the quck reply. Hvae recently moved to the Xerox platform and still learning. Trying to get my head around a few things like SIQA at the moment. Have the alignment sorted ran on a lightweight media and its worked perfect for the 300gsm stock I'm needing to run on.
Appreciate your help.

[MRCAnalyst]

Hi Tony_H,

    What I do in this situation is to run a tray alignment with a lighter weight stock of the same size from the same tray and save that alignment profile. Then I test that profile on the heavier weight stock. If it aligns properly then we're good. If not then at least we have a baseline alignment that we can adjust manually for fine tuning or apply an image shift in the DFE if it's only off in x/y not the other things that SIQA adjusts for (perpendicularity, magnification, skew).

[Tony_H]

Just looking for a solution to the same problem myself. If you complete a SIQA alignment on a lightweight stock will that still work for the heavy stocks or do heavy stocks just have to be carried out manually?

Appreciate any help.

Thanks

[Joe Arseneau]

No , you cannot do it

[RandyD]

Can I use SIQA to align Heavyweight 4 300gsm stock? When I tried to use auto alignment I could not print the test on that heavy of a paper because it wanted to autoduplex it.