cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
mboowho62 New Member
New Member

Workcentre 7435 error 116-317

Product Name: Workcentre 7435
Operating System: Windows 10 x64

Got this error and found that it is related to memory. Removed and reseated both memory cards. No change.

Then removed one memory card (slot M2) and tried again. Error remained. Tried with other memory card in same M1 slot. Error remained. 

Purchased new memory card and placed in M1 slot. Error still remains.

Suggestions on what to try next?

0 Kudos
3 Replies
gabiene Frequent Advisor
Frequent Advisor

Re: Workcentre 7435 error 116-317

Hi,

Pull out and reinsert PS DIMM on the ESS PWB (the board where the network port is. The board have 3 thumb screws: upper, lower position and at the handle).

 

Gabi

mboowho62 New Member
New Member

Re: Workcentre 7435 error 116-317

There are only three DIMMs that can be pulled. The two 512Mb ones and one with a CR2450 battery on it. I pulled and reseate all those.

0 Kudos
gabiene Frequent Advisor
Frequent Advisor

Re: Workcentre 7435 error 116-317

Hi,

The description of the fault code is "ESS ROM DIMM #1 check", but I understand that on your printer there is no such of DIMM. In this case it remains to replace the ESS PWB.

Gabi

0 Kudos