cancel
Showing results for 
Search instead for 
Did you mean: 
New Member
New Member

Workcentre Pro 90 Error

I received the initial error that I needed to replace the xerographic module which I did, now I get the error: "printing fault copier not available"

 

I ran the xerographic system routine and had no errors, I powered down the system as instructed in the FAQ, I also performed the cleaning steps the scorotron still same message, please adise.

Thanks

Jeff

 

Further investigation shows the finisher is not getting power, I assume when you first turn on the device there should be some sort of activity within the finisher but there is none. The small board that connects both devices are showing flashing red lights but that is it. Papers jam at entrance to finisher as well.

0 Kudos
2 Replies
Highlighted
Community Manager
Community Manager

Re: Workcentre Pro 90 Error

Hello jsimmons487.

 

If you have not already resolved this issue, we suggest you search our online knowledgebase for this product:  WorkCentre Pro 90.

 

Alternatively, you can visit our Contact Us page for other support options.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Highlighted
New Member
New Member

Re: Workcentre Pro 90 Error

This kind of error to be solve for many years. Now advance technology no any kind of issue generate it.

0 Kudos