Xerox 5225 driver install issues

[neal]

This worked. Thank you.

[Joe Arseneau]

Under no circumstance will the Microsoft driver work.

So if this one doesn't work, you are out of options it would seem

[neal]

This is what I see when I go to printer properties.  There is no where to add accounting codes.  

[neal]

Anything else I can try?  I still don't have accounting codes and cannot print.  Please advise.  

[neal]

When I enter the IP of the printer and then hit next I get a screen that says install the print driver.  I used the Have a disk option and installed the driver that way but I did not have the option to enter accounting codes when I went into the properties where it would normally be.  I cant print without the codes.  

I then deleted the printer and used the windows update for choosing a driver and I again don't have the option to enter accounting codes.  

[Joe Arseneau]

You need to use the Add Printer option in Start > Control Panel > Devices and Printers

Add a printer, choose the Printer I want wasn't listed option even if it shows up.

Then install Manually as a Local Printer

Then Create a new Port > Standard TCP/IP Port  (You need to enter your printers IP at this point)

Then make good and sure that the Query the Printer and automatically select a driver to use is not checked .

After the wizard finishes, Go into Devices and printers and then right-click the printer and choose Printer Properties > Ports > Configure Port and make your setup match these highlights exactly

 

[neal]

When I extract there's 2 folders - 1 titled UNIV_5.617.7.0_PS_x64_Driver.inf but I do not see a way to install a driver from that folder.  

[neal]

I tried installing this one.  I extract the folder to my desktop.  I do not see anything to install.  How do I install this driver? 

[Joe Arseneau]

You appear to be listing old 32bit drivers, the current driver for x64 is UNIV_5.617.7.0_PS_x64.zip

[neal]

I'm trying to install a Xerox driver for my Xerox Work Centre 5225.  I'm getting the following message:

Installation Status

The Xerox Global Print Driver was not able to be installed on your computer.

The following items were not able to be installed: 
- Queue: Xerox WorkCentre 5225 PS 
- Driver: Xerox Global Print Driver PS

Reported Message: 
- [PS] Failed to install driver. 87/0x57: The parameter is incorrect.

Please try rebooting your computer and running the installation again.

I've tried rebooting my computer multiple times and still not having any luck.  I need to use accounting codes for printing and was using a driver that was recommended to me on a previous thread on here.  So far I've tried UNIV_5.520.6.0_PrintSetup & also X-GPD_5.433.6.0_Setup - Xerox 5225 Driver.

I am trying to install on a brand new computer running window 10 64 bit.  I can install the printer using the microsoft add a printer option but then I don't have the option to add accounting codes so the printer does not print.  Any help would be appreciated.