Hi PhantomTech,Thank you for using the Xerox forum.I would suggest that you review the linked site to contact a service provider who would have a service manual.If that does not work out, you may consider contacting our specific product support experts, for customers in the USA at the following link: Fast Track to the Expert If you are outside the USA you should contact the local support center in your area which you can find here:http://www.xerox.com/about-xerox/contact-us/enus.html
I am looking for a Part Number for Xerox 525 Feeder 097S03174 connecting harness.
The one that the Copier sets on / plugs into on the Left rear of the 525 Cassette Feeder.
It has a Blue 8 pin connector on the PCB end and 2 by 4 pin (8 pins in all) that snaps into the deck.
We broke two of the pins off one endso, in technical terms cassette No Worky.
Thanks for Sharing Your Time.
Total length is 8". See Picture Below