the first with the error 03-520-00
this error will veryday ,and now very hours will have to reboot to freeze the touch monitor.
and now will stay with the green screen to say powing up , and always reboot.
machine for 2 year but only about 10000 papers:(
somebody can help us?
thank you so much
Solved! Go to Solution.
The fault implies the HDD failed, It's a SATA 250GB 320GB 2.5 inch(laptop) drive.
After replacement (if it is the issue/cause) you would need to altboot the printer (Install the firmware from a USB key)
thank you for your informationen.
we will try to replace the harddisk ,
where we can find the informationen how to install the firemware from USB?
thank you so much
In your PM's
at first must thank you for your help.
now we have change the harddisk with SATA 250G 2.5`
want want to try it.
usb with new Fireware has alreday through the Email finised.
but the machine reboot always. after reboot in green , for about 10-20 sec then reboot itself :(
I have absolutely no idea what you are saying.
If you put thr drive in the printer and did exactly what I stated in the PM to you, then you would need to pay someone local to fix it for you. I have given all the information that should have been required.
we have found the place of the harddisk
and replaced it.
but found the old are from toshiba with 320G
and from the message we have boung a 250G
it will problem ?
after replace , the root problem is till retain the original problem,
tomorrow we will try make fotos for the screentshot of the File Directory and make foto of the printer through pm to you.
thx
Nobody needs to see a file directory, the altboot process does all that, at no point should the drive be hooked up to a PC.
You did not understand my question
We have bought a 250G hard drive from the one you provided, but found that the old machine was a 320G hard drive
We followed the USB STICK steps you've done, and it's connected to the machine, but the machine just keeps on running, and we wait 30 minutes and still restarting at 20-40 seconds
The problem is not solved at all
Now our question is, is it because the old hard drive is 320G and the 250G hard drive we bought according to your information does not match this machine?
Our problem has not been solved Why click to solve the problem has been solved? ?
The problem is not solved at all -
At no point have I suggested it was
Now our question is, is it because the old hard drive is 320G and the 250G hard drive we bought according to your information does not match this machine?
Nope, will just mean slightly less storage if yo uscan to mailboxes
Our problem has not been solved Why click to solve the problem has been solved? ?
Absolutly nowhere did I or anyone else ask you to. Finish reading the sentence.
"Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues."