Hello. I have a problem with my Xerox Versalink B7025. After updating the firmware to version 58.59.11, the device rebooted and did not come out on readiness. I see a message on the display please reboot 117-348. I followed next steps: 1. Switched power off and on the machine 2. Entered into special boot mode and selected NVRAM init but problem not solved 3. Using Software Loading via the Special Boot Menu also did not solve the problem. It is possible to have a broken SD card. I have empty transcend sd card 16GB. Where i can find SD card image to write it on an empty SD? Please help me for this problem Thanks
I see no one has responded to this post yet. So, at this point I would recommend contacting your local Xerox Support Department to speak with a Product Specialist for more assistance. Please call 1-800-821-2797 or 1-800-835-6100.
Thanks, TammyL-Xerox Community Manager
Be sure to click Kudos for those who have helped you. Select Accept as Solution for posts that have helped to solve your issue(s)!