cancel
Showing results for 
Search instead for 
Did you mean: 
JRA
New Member
New Member

Xerox Workcentre 7225 displays the "P" code on its controller power keeps cycling, no display.

Product Name: WorkCentre 7220/7225
Operating System: Not Specified

Hello,

I'm hoping someone could help me out on this one...

Xerox Workcentre 7225 is displaying the red letter "P" code on its controller board power keeps cycling, display never turns on. Hard drives spinning, green check lights on controller are on as well as the ethernet link / activity.

Controller cycles through self test up until "P" then resets after one second and repeats forever.

Any input on this code would help!

Thank you,

John

0 Kudos
3 Replies
CathyO-Xerox
Community Manager
Community Manager

Re: Xerox Workcentre 7225 displays the "P" code on its controller power keeps cycling, no

Hello JRA,

I searched the online Support and found this article for power cycling that may help you.

Thanks,
CathyO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
TammyL-Xerox
Community Manager
Community Manager

Re: Xerox Workcentre 7225 displays the "P" code on its controller power keeps cycling, no

Hello JRA, 

I found an article for power cycling on and off.  If you are still having issues after trying these steps, I suggest that you call into our support department for assistance @ 1-800-821-2797.

Thanks,
TammyL-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
KK-NJ
Member
Member

Re: Xerox Workcentre 7225 displays the "P" code on its controller power keeps cycling, no

If a reboot doesn't resolve, that machine may need to have it's firmware reloaded or some hardware replaced.

0 Kudos