cancel
Showing results for 
Search instead for 
Did you mean: 
philgman Member
Member

altalink c8035 finisher stacking

Jump to solution

one of out c8035 units has a problem with the stacker unit not straightening the pages correctly when there are jobs larger than 10 pages. it's the exact same issue reported here (http://forum.support.xerox.com/t5/Hardware/Xerox-AltaLink-B8065-amp-B8090-Finisher-Stacking/m-p/2105...

0 Kudos
2 Replies
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: altalink c8035 finisher stacking

Jump to solution

Update the firmware as told in the other thread where you posted this.

Make sure the printer and finisher are level

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
Highlighted
philgman Member
Member

Re: altalink c8035 finisher stacking

Jump to solution

the issue is not related to the firmware. this was a hardware issue. there are 2 rollers in the finisher unit (look inside above the stapler unit. one of the supports (very flimsy unsupported metal arm) was bent. this was verified and fixed the identical problem on 2 units.

 

0 Kudos