cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

creo cx260 installation cables

It seams there are 3 essential cables that must be installed on the server.

 

1. Printer Cable

 

2. SCAN (network cable)

 

3. Network cable

 

On the #2, is this supposed to be crossover cable or any regular network cable, I think this is used for the SCAN feature, and the manual call's this as a Netscan crossover application port.

 

On #3, if I just connect to one computer a Mac Computer, can I use a crossover cable instead of a router?.

 

Thank you.

-Luis

Creo cx260
Docucolor 260
0 Kudos
2 Replies
Valued Advisor
Valued Advisor

Re: creo cx260 installation cables

Hey you!

 

If you do have Cat6 cables, you will no longer need any special crossover cables as they work both ways.

 

 

Best Regards

Kimzi


--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

0 Kudos
Highlighted
New Member
New Member

Re: creo cx260 installation cables

If I don't have a CAT6 cable, for the #2 SCAN connector, I must use a crossover cable?
Thank you.

 

I had a regular cables connected, and somehow I got this error on the server:

"Connection to the server has been cut off. Try to reconnect Later". Then I will hit OK, and the program will just crash and will need to ran again, this will work fine for a minute and then crash again. That is way I thought maybe the crossover cable was needed to connect the server with the SCAN on the docucolor 260.

Creo cx260
Docucolor 260
0 Kudos