No, not as individual part for a reasonable price.
I found lots of defective WC6515 on the market, but shipping them seems to be impossible. I'm betting each one of them has a working ADF scan module...
The part number of the scan module seems to be custom, officially liteon has not documented anything starting with "DL620", it should be "DL520":
Since my device works fine with the (repaired) flatbed scanner, I've got lots of time to find a solution.
FYI: I finally found someone who would ship their defective unit to me.
The unit also had the 062-380 error, and it seems like the flatbed scan module was at fault. Since I had already restored my unit to partial function by swapping flatbed / DADF scanner module, it was a <15 minutes fix to swap in the DADF module from the "bought for parts" unit.
I now have a fully working unit again and an additional set of drums, toner and waste toner bottle.
Total cost including shipping was less than an complete (original) toner set :-)
I have got the same error code on the display of my MFP Xerox WC 6515 DNI. I am very interested in your successful repair. Please, may I ask you to tell more detailed (step by step procedure) how you swapped the scan head from the CIS module inside the DADF into the CCD inside the IIT/platen glass scanner?
I Would like to execute the same first step repair to get at least the CCD scanner running again and find later a working scan head to fix the broken one in the CIS module inside the DADF.
You mentioned a service documentation, bat I could not find one for the Xerox WC 6515 MFP. Where can I find it?
I greatly appreciate your help!
Got exactly the same problem and waiting for the costs from Xerox... yay...
@missingparts I'd also be interested in and thankful for instructions how to change the unit once getting hands on spare parts.
Thank you so much and best regards,
PS. Yes, 452€ for an obvious production failure of the whole series makes me change my printer and scanner brand for the whole office. Farewell Xerox, never again.
i purchased this Workcentere 6515 less than a year ago. We print very little and my IT guy said that since we don't print very much, cheap inkjet printers that are not used very often will have the ink dry up and the print heads will not work. So he sugested we get a lazer printer with a powder toner. I looked over the **bleep** and settled on this Workcentere 6515. It has all the features we needed and it was a midrange in price. This morining I needed to print a set of plans. The plans printed just fine, but I'm getting several error codes (062-380) & (062-386). This thread tells me it's a scanner problem. I think I've used the scanner twice or three times in the 8 or so months we have had this Workcentere. So I tried the scanner, it wont scan or copy. I get a message saying "Unable to start job" I've tried restarting and turning it off than back on, no luck. I paid 800 pluss dollars for this machine and it was supposed to be the last printer I ever bought. If this is the way Xerox is going to do it's customers, I'll be looking for someone else to do business with.