workcentre 5230

[CherylO-Xerox]

Hi irengej,

Thank you for using the Support Forum. Please take a look at these solutions for not printing and see if any of them will help you.  If not please consider contacting your support centre for further assistance.

[irengej]

My workcenter printer 5230  refuse to print , it instead send 5 consecutively  bips  . Can anyone help me in solving this issue .

[ordicoach]

Hello,

Here is how to do this :

1.Login as the System Administrator or Key Operator.

2.Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed.
3.Select the [Tools] tab on the Touch Screen.
4.Select the [System Settings] button.
5.Select the [Common Service Settings] option from the Group section.
6.Select the [Audio Tones] option from the Features section.
7.Select the required option to configure or modify, and then select [Change Settings] button.
8.Select the required audio tone.  Audio tone options include: [Off], [Soft], [Normal], [Loud].
9.Select the [Save] button.
10.If necessary, repeat steps 7 - 9 to configure each option.
11.Select the [Close] button.
12.Press the [Log In / Out] button on the Control Panel. An "Are you sure you want to logout?" message will be displayed.
13.Select the [Logout] button on the Touch Screen.

[MargoV-Xerox]

from www.support.xerox.com here is the default user name and password.

• Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
• Enter the System Administrator user ID using the numeric keypad on the Control Panel or the keyboard on the Touch Screen, and then select the [Next] button.
• Enter the password in the field provided, and then press the [Enter] button.
  
  NOTE: The user ID can be 1 - 32 alphanumeric characters; the default user ID is "admin" (case sensitive). The password can be 4 - 12 alphanumeric characters; the default passcode is "1111". The password characters will be displayed as asterisks (*). If a number is mistakenly entered, press the [Clear (C)] button and then re-enter the password. To cancel the operation, select [Cancel].
  
  I hope this helps.

Margo

[sarabop]

Thanks  Fabio, i will see if i can get admin log-in and give it a go

Regards

[Fabio]

if you goto the support and knowledgbase on this xerox site, goto your the support of your machine and type in the keyword "audio" , then you will find an article howto disable audio sounds :)

[Darkwing]

My problem too!  That is precisely why I came here.  We have a Workcentre 5225A in a classroom setting.  How can I turn off the beeps?

[sarabop]

Hi

We use a Workcentre 7435 and its a good bit of kit.  The only downside is that when the toner runs low it constantly beeps, I know its low, i have the new toner here - its not quite run out yet so does not need changing....how do i stop the beeping! any suggestions would be welcome from fellow users.

Thanks