We use a Workcentre 7435 and its a good bit of kit. The only downside is that when the toner runs low it constantly beeps, I know its low, i have the new toner here - its not quite run out yet so does not need changing....how do i stop the beeping! any suggestions would be welcome from fellow users.
if you goto the support and knowledgbase on this xerox site, goto your the support of your machine and type in the keyword "audio" , then you will find an article howto disable audio sounds :)
from www.support.xerox.com here is the default user name and password.
Here is how to do this :
1.Login as the System Administrator or Key Operator.
2.Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed.
3.Select the [Tools] tab on the Touch Screen.
4.Select the [System Settings] button.
5.Select the [Common Service Settings] option from the Group section.
6.Select the [Audio Tones] option from the Features section.
7.Select the required option to configure or modify, and then select [Change Settings] button.
8.Select the required audio tone. Audio tone options include: [Off], [Soft], [Normal], [Loud].
9.Select the [Save] button.
10.If necessary, repeat steps 7 - 9 to configure each option.
11.Select the [Close] button.
12.Press the [Log In / Out] button on the Control Panel. An "Are you sure you want to logout?" message will be displayed.
13.Select the [Logout] button on the Touch Screen.
Thank you for using the Support Forum. Please take a look at these solutions for not printing and see if any of them will help you. If not please consider contacting your support centre for further assistance.