cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

xerox phaser 8560

I have a phaser 8560 I am working on that when you turn it on it starts the post warm up and then you hear two clicks and throws code fault 37,018,45:13374.

 

Kinda at a stand point on this, what would be some options to look at?

 

Thanks for any advice given

Joe

0 Kudos
2 Replies
Highlighted
Community Manager
Community Manager

Re: xerox phaser 8560

Hi Joer 115,

Thank you for using the Support Forum. The code you are seeing is a "Printer Error" according to the online support.  Please make sure you have the machine plugged in to a dedicated outlet, no extention cords, power strips or surge protectors just to test to see if the power source is the issue.  If the problem persists please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Highlighted
New Member
New Member

Re: xerox phaser 8560

The error you are getting is a "Main Tray Deskew Clutch Disconnect" error.  I believe that the clutch is part of the Media Drive Assembly on the left side of the printer.

0 Kudos