cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

016-910 message

Jump to solution

Hi!

 

I have a problem with new VersaLink C7025 with printing.

When try to print something the machine give an error as on the picture.

tried many ways to solve it - updated firmware. tried diffrent drivers, reseted fully no luck.

Please kindly assist on this.

Thank you in advance

viber image1.jpg

 

 

0 Kudos
9 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: 016-910 message

Jump to solution

Why not just put the paper in the tray exactly as it states?

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: 016-910 message

Jump to solution
Most of the time, this error appears when printing a page in US letter format when the paper format in the printer is A4. With other printer brands, the problem is solved by itself but not with Xerox? Why Xerox does not allow to print even if there is a paper error?
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: 016-910 message

Jump to solution

They do, you just turn it on in EWS, it isn't on by default becuase it isn't preferential to most.

 

EWS > System > Defaults and Policies > Specified Paper is unavailable

 

2.JPG

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
Highlighted
New Member
New Member

Re: 016-910 message

Jump to solution

I know this thread is a little old; I'm having this problem as well. The posted solutions haven't solved it. Any other options to try?

 

The problem:

error code 016-910

printer says it's waiting for 8.5x11 paper, but also recognizes that 8.5x11 is in tray 1

I've tried the easy stuff: Opening and closing the tray, physically readjusting the paper size guides in the tray, factory reset, connecting via USB and via the network.

I've also tried adjusting the setting above to accept A4 and US Letter interchangeably

 

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: 016-910 message

Jump to solution

But is the paper in tray 1 plain white paper? Because it also matters, not just the size. So does the orientation you load it

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: 016-910 message

Jump to solution
Thanks for your reply. Colour matches and I checked both orientations too.
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: 016-910 message

Jump to solution

Then it won't be loaded as plain paper, and if it is, your error message (not the fault code) is different

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: 016-910 message

Jump to solution

I've had some success by setting the tray to dedicated, rather than auto-select paper size. For some reason this seems to help it print sucessfully.

0 Kudos
Highlighted
New Member
New Member

Re: 016-910 message

Jump to solution

Hi guys,

its was driving me nuts because settings inside Word clearly say its printing A4 paper size and settings in Xerox Print Experinece are missing. I was able to adjust the settings in following way

Word > Print > Printer Properties > Printing Options > Paper > Other Size > Change Documents Size > A4Printer settings.png

I hope it will help someone :) I am using Xerox WorkCentre 6515.