Solved! Go to Solution.
Short answer is No
Longer answer is No, because
Even if you got a driver that could do it, the printer can't, it maxes the settings as 19 inches (482.6mm).
So when the job got there, it would fail and not even load the paper.
And, if you got far enough to feed the paper, it would immediately declare a jam, because the sensor would pick up that it could still see paper after the 19 inch mark passed, which causes a "Ghost jam" and stops the printer internal, which happens because if it doesn't know where both ends of the page are, the possibility is that it is going somewhere it shouldn't, so it faults to make sure it doesn't damage the printer or the stock.