cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
FreeFlow User

All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution
Product Name: Xerox AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer
Operating System: macOS 10.15 Catalina

My coworkers from across the nation have been reporting issues with macOS Catalina and the current macOS Xerox driver that causes all print jobs to specify tray 1 when "Auto Select" is specified in the macOS Paper Feed dialog box. I have validated this issue personally using macOS 10.15.5 when printing to a Versalink C7030, Altalink C8045, and a C70. I confirmed that Airprint submissions are not affected by this issue. Machines that do not have 2 tandem letter trays are less likely to notice this issue because tray 1 is often configured with letter size paper. With tray 1 configured with a size other than letter sized paper a new driver installation and subsequent print job, with default settings, will get held for resources. Changing the CUPS default for "Paper Tray" under the Paper Output section does change the tray that the jobs default to but it does not correct the behavior of Auto Select.

I'm currently on hold to start a log for this issue and the message keeps talking about this forum, so I figured that I would get this post up while I'm on hold. I can only test on my Macintosh that is running 10.15.5 (including the supplemental update) but I have heard reports of this occurring on versions of macOS back to 10.15.3. In almost all instances users are reporting that the driver worked as intended until they updated macOS to a newer version.

0 Kudos
5 Replies
Agency Analyst
Agency Analyst

Re: All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution

I too am experiencing a ton of issues with 5.5.2 driver and Tray 1 across multiple platforms.  Hoping there's an update to the issue as I have 3 customers that are anxiously awaiting a fix.

0 Kudos
Highlighted
FreeFlow User

Re: All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution

I have started a log with Xerox and I'll update this post when we come to an eventual conclusion. For now my best recommendation is to either edit the CUPS configuration on each workstation to change the default tray to one that contains 8.5x11 (A4 outside of the US) paper or connect to the printer with Airprint if that is supported by the model. I looked at a packet capture that I took and it is clear that the job properties are specifying tray 1, when auto select was picked, so the machines are responding as they should.

0 Kudos
Highlighted
FreeFlow User

Re: All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution

A trusted coworker of mine tells me that the new macOS driver that just released on the support site (Version 5.5.9) resolves this issue. I spent the day working in a Windows environment so I haven't been able to validate this myself yet. But if you are experiencing this issue install the new driver. If you're navigating the Xerox support site you may still find the old version listed for Catalina. Change the dropdown to Mojave (10.14) and you'll see it. Here's a direct link and on the side of the page you'll see that it is supported on macOS 10.13-10.15.

https://www.support.xerox.com/support/primelink-c9065-c9070/file-download/enus.html?operatingSystem=... 

0 Kudos
Highlighted
New Member
New Member

Re: All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution

I am having no luck with the new driver, either. In fact, I think the problem is worse because I can't even specify another tray besides Tray 1. Called local dealer. Was told Apple broke it so they'll have to fix it. Called Xerox and after a long period of time the agent said I needed to call my local dealer. Meanwhile, specs for my machine (D-125) still claim it works with Catalina. Not true. Not true at all. I have an old machine running *Classic*. Guess I'll try to print a pdf from that. This is not acceptable.

0 Kudos
Highlighted
FreeFlow User

Re: All print jobs from macOS Catalina (10.15.3 or newer) are specifying tray 1 by default.

Jump to solution

Hi Bullwinkle,

    I haven't updated this post but I did look into this extensively and another forum member confirmed that my current solution works for them. You can see the details in my response to their post found here.

https://forum.support.xerox.com/t5/Printing/Bug-with-Mac-OS-10-15-4-and-Phaser-7100-driver-5-5-2/td-...