cancel
Showing results for 
Search instead for 
Did you mean: 
Moderator
Moderator

Attention Mac OS 10.6.8 users

Hello All Forum Members,

 

While we are waiting for an official patch to be released from Apple to address the CUPS printing issue, we have made our temporary fix available. The file can be accessed on the Drivers & Downloads pages for the affected products on the Support site, or here:

 

http://xrx.sm/MacOS10.6.8Fix

 

This is not a permanent solution and is not intended for 10.7 / Lion, but will correct the problem for our products in 10.6.8.

 

If you have problems installing this fix, or otherwise, please contact the Support Center.

 

Thank you!

 

PamY-Xerox

Community Manager

Thanks,
PamY-Xerox

Be sure to give out Kudos and select "Accept as Solution"
0 Kudos
3 Replies
Highlighted
New Member
New Member

Re: Attention Mac OS 10.6.8 users

Any info about Lion compatibility would be great (Phaser 3250)

0 Kudos
Highlighted
Moderator
Moderator

Re: Attention Mac OS 10.6.8 users

Hello macman.

 

Please refer to this document for information regarding which of our products are compatible (and to what extent) with Mac OS 10.7 / Lion: http://xrx.sm/MacOS10.7Compatability.

 

Unfortunately most of the Phaser drivers are not yet available, but should be shortly. Please check the drivers site regularly for updates and driver availability. The OS 10.7 Compatibility document is also updated frequently.

 

Thanks,

PamY-Xerox

Community Manager

Thanks,
PamY-Xerox

Be sure to give out Kudos and select "Accept as Solution"
0 Kudos
Highlighted
Occasional Contributor
Occasional Contributor

Re: Attention Mac OS 10.6.8 users

This was just posted by the good folks over at the EFI forum:

 

Apple has posted a fix for the "Paused" printer condition seen with some printers after installing the 10.6.8 update. 

- From the Apple menu choose Software Update.
- Install the Mac OS X 10.6.8 Supplemental Update.

- Printers that were "Paused" work again after Resuming print.