cancel
Showing results for 
Search instead for 
Did you mean: 
2 Replies
shervin zargham
Frequent Member
Frequent Member

Re: B7130-065-223 Fault

Hello 

can you specify what do mean by step two ? 

you mean :

The connections between the IIT Trans PWB J7501 and J7502, and the DADF PWB J751 and
J761 for open circuits, short circuits, and poor contacts.

we checked all the connections, and no problem, the machines are new so all boards and coonect are fine. I believe there should be an NVM memory which we should change. 

So any suggestion ? 

0 Kudos
Woliwon
Valued Contributor
Valued Contributor

Re: B7130-065-223 Fault

Sounds like you didn't follow the RAP correctly. Check step 2.
0 Kudos
shervin zargham
Frequent Member
Frequent Member

B7130-065-223 Fault

Product Name: VersaLink B7025/B7030/B7035
Operating System: Windows 8

Dear all,

We had a new Xerox B7130 and after we activated the machine, we faced with the error code of 065-223, finally we made the decision to replace the whole DADF and ESS board of the machine with another new machine. After we passed all the steps mentioned in “065--223 CIS Connection Fail RAP”, page 447 in documentation,  we still receive the same error. So, we disappointed and we returned the ESS and DADF unit to the new machine and surprisingly the second machine inherited the same error. Now both machine show the same fault.

Any suggestion in this regard would be extremely appreciated.

 

Many Thanks,

Shervin Zargham

0 Kudos