@marianamont wrote:
I have a Xerox B230 and its brand NEW! I used it last week and everything was perfect, then this week I started to have problems. I used cardboard 200gr - 225gr. and sometimes it print AMAZING, but sometimes it looks like my toner is gone (which is not)..
I don't understand whats going on..
If you have a brand new Xerox B230 printer and are experiencing inconsistent print quality, where sometimes the prints look great and other times it appears as if the toner is depleted, there are a few potential causes.
Check the toner levels: Ensure that the toner cartridge has an adequate amount of toner. You can usually check the toner levels through the printer's control panel or software interface. If the toner is low or empty, replace the toner cartridge with a new one.
Shake the toner cartridge: If the toner levels are not low, the toner might be unevenly distributed within the cartridge. Remove the toner cartridge and gently shake it from side to side to redistribute the toner powder. Reinstall the cartridge and try printing again.
Verify the paper settings: Ensure that the paper settings on the printer are correctly configured for the type and weight of cardboard you are using (200-225gsm). Adjust the paper type and weight settings through the printer's control panel or software interface to match the paper you are using.
Clean the printer: Dust or debris inside the printer can affect print quality. Follow the manufacturer's instructions to clean the printer, including the toner cartridge area, paper path, and any other accessible parts. Make sure to use appropriate cleaning materials recommended by the manufacturer.
