Banner sheet

[Donaldini]

Unfortunatly it didn't work.

Resetting te settings on the copier yielded no positive results.

[Donaldini]

I went to the machine logged on as admin and went into the settings, turned on the banner sheet for 1st page, logged off.

Then I logged on again as admin (just to be sure the setting was applied), went to that setting again and turned it back off.

I posted a notice so people would let me know if it happens again, now i'll have to see..

[Scotte]

I ran into that issue on a different model Xerox.  What finally fixed it for me was, at the machine, I went into the setting for the banner sheet that showed disabled.  I changed it to enabled and saved the setting.  Then I went back in and changed it to disabled and saved the setting again.  I haven't had a problem since.

[Donaldini]

I checked on 2 other users' computers and the regular Properties didn't have it. The Defaults are disabled for regular users, but those also don't have it on the Server.

[JordanAXAUQE-AA]

Are you ckecking in both locations:

1. Printer Properties -> Preferences -> Advanced

AND

2. Advanced -> Printing Defaults -> Advnaced

I would bet that when you are printing the banner sheet one of those options is set to ENABLED.

Hope that helps!

[Donaldini]

Are there any drawbacks or things I should consider when switching to LPR mode?

The banners have indeed been disabled on the windows 2003 server's driver, when it comes to the computers I cannot be 100% certain. I can say that, when I had this problem, immediatly afterwards I went to the settings on my computer and they stated it was also turned off.

[Fabio]

- it sometimes helps to configure the port settinng to lpr mode instead of raw, with quene name lp

open driver properties, goto ports tab, then click on configure port

also , you stated you have dsiabled banner on the driver, but if you print a document, and you goto properties , it it also disabled on the clients?

maybe the configuration wasnt pouplated to the clients from the server, or maybe the profile wasnt updated on the client

[Donaldini]

I'm having problems with our Xerox WorkCentre 7232.

Lately it's been printing a lot of banner sheets as show below:

I checked the settings on our printer on our Windows Server 2003 and went to the machine to check the settings.

Both appear to have the banner sheet off.

I tried the steps below to do it on the machine: 

copy/pasted from support section : 

1. Press the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed on the Touch Screen.
2. Select the [Tools] tab on the Touch Screen.
3. Select the [System Settings] button. The System Settings screen will be displayed.
   
   NOTE: If the System Settings option is not displayed, it is required to login as a System Administrator to complete this solution. See the Related Items below for additional information.
   
   
4. Select [Print Service Settings].
5. Select [Other Settings].
6. Select [Banner Sheet], and then select [Change Settings].
7. Select [On] to enable or [Off] to disable the Banner Sheet.
8. Select the [Save] button.
9. Select the [Close] button.
10. Select the [Logout] button on the Touch Screen.