hi, in some firmwares it was bug
on the webinterface of the machine, turn on banner , apply that setting, turn off again
makes no sense what i wrote, but its a bug, so the setting is saved again ...
This is a Xerox WorkCentre 7545 v1 Multifunction System
It started happening 2 days ago just after the printer rebooted following a software update to Version: 061.121.227.03404
Please let us know what machine you are using that will make a difference as to what you can do/try to correct the problem.
I have the same issue tried all the suggestions and the driver defaults back all the time to print ID on the banner page.
The printer is set as this:
It looks like you are trying to disable the banner sheets.
If this is the case, please try the following:
If they are already set this way, it is a bug in the settings. Click Yes in both, click Apply and then click No in both and click Apply again.
I hope this helps.
yes i know :)
therefore you can make predefined drivers and give that driver to your customer...
It would be much simpler for Xerox to NOT put this in the print drivers as a default. Out of over 3,500 customers, I had 1 that wanted banner sheets. I am not sure why they are ON to begin with. Customers do not want to pay for this sheet.
yes, open up the driver properties, then goto the port tab, then click on configure port
You mean your previous post?
"it sometimes helps to configure the port settinng to lpr mode instead of raw, with quene name lp
open driver properties, goto ports tab, then click on configure port
Where exactly do I need to do this, one the Windows Server 2003 driver settings?
what other things have you tried? also the port configure?