Banner sheet

[Fabio]

yes, open up the driver properties, then goto the port tab, then click on configure port

[DFM]

It would be much simpler for Xerox to NOT put this in the print drivers as a default. Out of over 3,500 customers, I had 1 that wanted banner sheets. I am not sure why they are ON to begin with. Customers do not want to pay for this sheet.

[Fabio]

yes i know :)

therefore you can make predefined drivers and give that driver to your customer...

[Cory049977-RSS · Accepted solution]

It looks like you are trying to disable the banner sheets.

If this is the case, please try the following:

• Open a web browser and enter the IP address of the machine in the address field.
• Click the Properties tab
• in the left menu, click the Services section, followed by Printing.
• Click the General link
• in the Banner Page section, ensure that Print Banner Pages and Allow the Print Driver to Override is set to No.

If they are already set this way, it is a bug in the settings.  Click Yes in both, click Apply and then click No in both and click Apply again.

I hope this helps.

[ThomasVit]

I have the same issue tried all the suggestions and the driver defaults back all the time to print ID on the banner page.

The printer is set as this:

Print Banner Sheets

 Yes

x No

Allow the Print Driver to Override

 Yes

x No

I tried the trick to put both to yes and then no, no luck

This happened just after we upgarded the firmware

[CherylO-Xerox]

Hi Thomas,

Please let us know what machine you are using that will make a difference as to what you can do/try to correct the problem. 

[ThomasVit]

Hi Cheryl,

This is a Xerox WorkCentre 7545 v1 Multifunction System

It started happening 2 days ago just after the printer rebooted following a software update to Version: 061.121.227.03404

[Fabio]

hi, in some firmwares it was bug

on the webinterface of the machine, turn on banner , apply that setting, turn off again

makes no sense what i wrote, but its a bug, so the setting is saved again ...