Hello,
all smart kits (except 008R13063, fixing unit) have been replaced and didnt cure the bad printing quality. The toners itself are 50%, but not fresh. The printer is seldomy used (around 1.000 copies/prints per year). Still, the printing quality is bloomy, like washed out, see:
Any ideas what to replace next?
Marc
Solved! Go to Solution.
Hi,
You need a tech to clean the Transfer Belt inside or even to replace it.
Gabi
Gabi,
thanks a lot, histant to try because of the cost. So my local Xerox dealer, who shipped mostly all of the smart kits, gaeve me the advise to:
clean the 4 drums by opening the quick release to the left (orange) and pull out the orange cleaner right below the drum, repeating 2-3 times each drum.
What can i say? Printer cured. Im very sure the old drums (at 20%) were replaced too early simply this cleaning mechanism was unknown to me.
Anyhow, works now!
Marc