,Re: Blooming / washed out print results

[Marc Ian · Accepted solution]

Gabi,

thanks a lot, histant to try because of the cost. So my local Xerox dealer, who shipped mostly all of the smart kits, gaeve me the advise to:

clean the 4 drums by opening the quick release to the left (orange) and pull out the orange cleaner right below the drum, repeating 2-3 times each drum.

What can i say? Printer cured. Im very sure the old drums (at 20%) were replaced too early simply this cleaning mechanism was unknown to me.

Anyhow, works now!

Marc

[GabiE-Xerox]

Hi,

You need a tech to clean the Transfer Belt inside or even to replace it.

Gabi

[Marc Ian]

Hello,

all smart kits (except 008R13063, fixing unit) have been replaced and didnt cure the bad printing quality. The toners itself are 50%, but not fresh. The printer is seldomy used (around 1.000 copies/prints per year).  Still, the printing quality is bloomy, like washed out, see:

https://imgur.com/a/DErI3kZ

Any ideas what to replace next?

Marc