Hi all I have a customer that is experiencing a problem with the bypass on the Versalink C8000 W, when you select it from the driver the device ignore it. It is just doing a bip.
Only the two trays are working. Any tips ?
Many Thanks in advance
Don't use WSD ports and make sure its a Xerox driver and not an MS class driver.
Follow these steps but keep in mind the numbers in the driver version will be different now
I can't get anything to print using the bypass tray. Other functions of this beast are working fine. Currently on System 65.50.61. I load either 8.5x11 or envelopes properly according to the tutorials on this website, and adjust/confirm the media settings on the LCD screen for the bypass tray. Regardless of anything I try, if the bypass tray is open, the print job stalls with an error in the print queue. The 6515 never acknowledges the attempt - it doesn't show up on the job list, just stalls at the computer with the (un) helpful status message "Error - Printing."
Any ideas? Thanks!
Solved! Go to Solution.