VLC7025 with 2 trays (and a bypass) and integrated finisher
End user has special paper in tray 2, normal paper in tray 1 and both LEF (portrait)
End user prints from Win10 Powerpoint(O365) and if they request landscape orientation and 1 staple upper left, the C7025 has to have SEF (landscape) paper in the tray otherwise the staple is lower right. This is because the printer prints 1-N and outputs face down. The position of the integrated finisher is fixed. So, is there a way to set output face up, N-1? That would make it possible to use LEF paper in tray1...
No option for face-down vs face-up, but rotate 180 should do it.
Rotating image on portrait paper with integrated finisher puts the staple on the upper right...the desired staple position is upper left (in landscape mode). no rotation is lower left. 180 rotation makes it upper right
No update, Face-up is not an option, which is why I stated to try rotate 180, which would move the staple to the opposite corner, sine you don't need the opposite corner, but need the adjacent corner, I don't know any way the driver could do it without that option, it may not be possible