cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Frequent Member
Frequent Member

C7025 printing - how to request output faceup N-1?

Interesting situation

VLC7025 with 2 trays (and a bypass) and integrated finisher

End user has special paper in tray 2, normal paper in tray 1 and both LEF (portrait)

 

End user prints from Win10 Powerpoint(O365) and if they request landscape orientation and 1 staple upper left, the C7025 has to have SEF (landscape) paper in the tray otherwise the staple is lower right.  This is because the printer prints 1-N and outputs face down.  The position of the integrated finisher is fixed.  So, is there a way to set output face up, N-1?  That would make it possible to use LEF paper in tray1...

 

Thoughts?

0 Kudos
4 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: C7025 printing - how to request output faceup N-1?

No option for face-down vs face-up, but rotate 180 should do it.

 

1.JPG

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
Frequent Member
Frequent Member

Re: C7025 printing - how to request output faceup N-1?

Rotating image on portrait paper with integrated finisher puts the staple on the upper right...the desired staple position is upper left (in landscape mode).  no rotation is lower left.  180 rotation makes it upper right

0 Kudos
Frequent Member
Frequent Member

Re: C7025 printing - how to request output faceup N-1?

Any update on this? So it is a NO on face up then?
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: C7025 printing - how to request output faceup N-1?

No update, Face-up is not an option, which is why I stated to try rotate 180, which would move the staple to the opposite corner, sine you don't need the opposite corner, but need the adjacent corner, I don't know any way the driver could do it without that option, it may not be possible

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos