I have a C75 with a freeflow print server. I was wondering if there is a way to create a custom spot color with the spectrophotometer from an analog sampel similar to the way it can be done on a Fiery print server to get the CMYK values right off the sample sheet. The FreeFlow does not appear to have this function.
Solved! Go to Solution.
Hi KurtG11994.
Thank you for using the forum.
I searched our product knowledge base and did not find an article that could assist you but you may want to browse through the site if you haven't already.
http://www.support.xerox.com/support/xerox-c75/support/enus.html?associatedProduct=XRIP_C75_Fiery
I would recommend that you contact support at 909-821-2797 for assistance.
I have since learned that spot color matching with a densitometer is not supported on the Freeflow print servers.