cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Member
Member

Cable connections in the Image Processing Module

Jump to solution
Product Name: Xerox Colorqube 9201
Operating System: Windows 10 x64

Where to fix the idle cable beside the Power Distribution PWBWhere to fix the idle cable beside the Power Distribution PWB

The machine is unable to print any image and from the error code it gave me, I traced it the Image Processing Module (with a single board controller pwb). I saw a cable, not sure of its pj number and also a vacant socket in the Power Distribution PWB but unfortunately the two don't fit.

Wondering what to do...

 

0 Kudos
3 Replies
Highlighted
Member
Member

Re: Cable connections in the Image Processing Module

Jump to solution

the image again...

WhatsApp Image 2020-07-08 at 09.06.55.jpeg

0 Kudos
Highlighted
Valued Contributor
Valued Contributor

Re: Cable connections in the Image Processing Module

Jump to solution

Hi selom

Wondering what to do...

type the fault code ! so someone here will try to help you ..

 

Please select "Accept Solution" and or select the Kudos for posts that may resolve your issues.

Regards !

0 Kudos
Highlighted
Member
Member

Re: Cable connections in the Image Processing Module

Jump to solution

the error code was 092-581

I traced it to a problem between PJ 401 and PJ 16.

After inspecting the PJ 401, i continued to the image processing module to inspect the PJ 16

However I noticed the idle PJ 215 and thought it had to fit somewhere.

but studying the wire diagrams and the connections in the single board controller, it was clear that the idle cable and empty socket were redundant.

I progressed by replacing the service loop and by God's grace that solved the problem.

the Machine prints perfectly now.