Cannot Access Web Interface With New WorkCentre 3335

[Bruce22]

Good evening,

Some further progress and new problems.

The printer shows that it is connected to the wifi network. In addition, the web interface - shown below - also indicates a wifi connection.

So, what's the problem? I can't print from Windows via WiFi (only USB works). :-(

Where do we go from here?

[mrstan]

what does this picture pointing to the lower left button supposed to mean?  It does not help get in connection on the web interface.

[Joe Arseneau]

Like this

[Bruce22]

Hi!

None of the buttons are labelled. What does the "Machine Status" button look like on the WorkCentre 3335?

[Joe Arseneau]

Go to the printer and switch it to wireless now so it will switch wired to wireless.

Machine Status button, then touch Network Settings > Network Connectivity > Wireless.

[Bruce22]

Hello,

I managed to find a way to disable the audio/beep notifications. It was buried deep in the printer menu.

I am able to print and scan with the printer when using a USB connection.

I am able to open the web interface via an Ethernet connection. However, I get a strange error message (see screenshot below) when I attempt to enable WiFi. How do I solve this?

[Joe Arseneau]

1. The printer isn't on the network, a 169 address is a failed address, meaning your router never gave it an IP address. If you can print, it must be over WiFi Direct or a USB connection.Either verify the cable connection or see here to give it an IP,

2. I can't find anything about setting the volume in any documentation or any Knowledgebase for the device. I'm pretty sure it can be done, but I don't have access to one to confirm/find out.

[Bruce22]

Good afternoon,

I have a newly purchased (installed Feb 1, 2020) WorkCentre 3335. I have connected it to my laptop by Ethernet cable. I can print a test page. I can also print the "Configuration Report."

There are two problems I need to fix.

1. I cannot access the web interface. I want to access that so that I can set up WiFi access.

Note: I have printed the "Configuration Report." This document provides an IP Address (currently: 169.254.209.29). When I attempt to access this IP address by Firefox or Internet Explorer, I get an error message as shown in the screenshot below.

2. Disable ALL beeps/audio notifications from the printer.

The printer regularly makes beeps and other audio sounds with each button press, start up and so forth. I would like to DISABLE ALL SOUNDS on the printer. How do I make that happen?