cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Change background of user interface on the MFP

Jump to solution
Operating System: Windows 10

Hello, 

we are planing to get a Fleet of VersaLink C400 / B400 and AltaLink C8030
and now there is one very importent Question! 

Is it possible to change the background of the user interface of the MFP 
instead of the grey standard background 

https://www.xerox.com/vids/VersaLinkSIM/index.htm

We would like to have our Company logo for example in the back.

 

Thank you for your help! 

0 Kudos
3 Replies
Highlighted
Xerox Analyst
Xerox Analyst

Re: Change background of user interface on the MFP

Jump to solution

Hi,

No, you cannot change the background that you are referring to. However, there are other options:

- if you use an authentication method, for instance with Equitrac, Ysoft, Cirrato or other, you can customize a screen that can be always displayed by default until the user do a login. This screen is an image where you can put anything you want.

- You can build an Info EIP app. This app will display any information you need, like company logo, the nearest exit map, what you can eat at the cafeteria, any information at all. You also can add animated gif, then at the end, you can set up this app to run by default each time the device is idle. This way, when a user goes to the device, the first thing he/she will see on the User Interface is the information you want to show.

Any of this options suits you?

 

 

 

Be sure to give out Kudos and select "Accept as Solution"
Highlighted
Xerox Analyst
Xerox Analyst

Re: Change background of user interface on the MFP

Jump to solution

Forgot to mention that option 1 is only available for Altalink device, for now.

Be sure to give out Kudos and select "Accept as Solution"
Highlighted
New Member
New Member

Re: Change background of user interface on the MFP

Jump to solution

Hi

We need to have possibility, same like in Altalink device, company logo must be visible in the main screen of the device but device main screen is blocked by MPS software.
User must see this logo, before he will authenticate to the device. After authentication to MPS software, device is unlock and panel with icons/aplications is visible to user - features like copying, prining, ect.
Can you tell me if this scenario is possible in Versalink devices?

0 Kudos