Yes, it is possible to change the character set on the Xerox VersaLink C7120 printer. The character set determines the available symbols and characters that the printer can print. To change the character set to PC850, you can follow these steps:
Start by accessing the printer's web interface. Open a web browser on a computer connected to the same network as the printer.
Enter the printer's IP address in the browser's address bar. The IP address can usually be found on the printer's control panel or in the printer's documentation.
Once you have accessed the printer's web interface, navigate to the printer settings or configuration options. The exact location of these settings may vary depending on the printer's firmware version.
Look for an option related to character sets or code pages. It might be listed under a printing or advanced options section. Click on this option to open the character set settings.
In the character set settings, select PC850 as the desired character set. Save the changes.
After changing the character set, try printing from your software again and see if the output improves. The printer should now use the PC850 character set for printing, which is compatible with the requirements of your old software.
I have a very old software that does not print well with the C7120, the creators of the software have told me that I have to change the character set of the machine to PC850. Is it posible?
Solved! Go to Solution.