Color Calibration on Altalink C8070

[GabiE-Xerox · Accepted solution]

And is strongly recommended when the drum cartridges an dthe IBT are replaced.

[DavidX28897-xrx · Accepted solution]

If you maintain constant humidity and temp once a week should be fine. You will get different tones at all levels of humidity/temp combinations so try to keep that tight. 

Also update to the 101 firmware on the printer side. 

[RIckHK]

Hello everyone,

I have an Altalink C8070 with an attached Fiery which I bought with the copier.

Is it necessary to calibrate the copier everyday, or is it overkill?

In regards of the calibration process, other than scanning the calibration sheet with the spectrometer and applying the settings, is there anything else that I should be doing or that pretty much it?

Thanks for the insight and help.

Rick