cancel
Showing results for 
Search instead for 
Did you mean: 
1 Reply
CherylO-Xerox
Valued Advisor
Valued Advisor

Re: Color issues on prints.

Hi Steve,

Thank you for using the Support Forum. Have you tried the Global PostScript driver?  Please try the PS driver and see if that gets you better results. 

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

steve.mpc
New Member
New Member

Color issues on prints.

Product Name: WorkCentre 7232/7242
Operating System: Windows 8.1 x64

Previously I ran a Xerox 7132. It started to fail at duplexing. So "upgraded" to a 7232. 

Tray 1 (checks)
Tray 2 (stickers)
Tray 3 (plain paper)

Using the same driver I had a color issue. When I print multiple copies to stickers I lose some color. 

If I print to plain paper the print jobs are fine? 
I am completely lost. I have tried the following drivers. 

UNIV_5.520.6.0_PCL_x64_Driver.inf
UNIV_5.548.8.0_PCL_x64_Driver.inf
UNIV_5.585.13.0_PCL_x64_Driver.inf

I have even tried a second Xerox 7232 and have the same issue when printing. Copies are fine. I never see the color issue with copies. The print jobs come from Excel 2016. 

The photo shows a single print job with 5 copies. Not 5 individual prints. 
Top is the stickers (tray 2) where I have the color issue. Pretty much will always have 2 bad out of 5 prints. 

Below is the plain paper (tray 3) 20191019_090632 redacted.jpgwhere everything printed as it should. Again a single print job, with 5 copies. 

I am extremely frustrated and hope someone can shed some light on this quirk. 

Summary. 
Print from Windows 8.1x64 / Excel 2016 a single print job with 5 copies and Tray 2 (stickers) will miss colors 
Print from Windows 8.1x64 / Excel 2016 a single print job with 5 copies and Tray 3 (plain paper) and job completes as expected. 

Thank you in advance for your time and help on this matter. 

FrustratedinOkc....

0 Kudos