Now I get a message from a forum moderator that my post has been rejected. Why?
Is there something wrong with asking about a line that fades out? Or is it that Xerox support has no answer?
If there is no answer or solution available, please let me know that. If there is a solution, please lelt me know that?
If you're referring to the 'wand' cleaning under the drums, I've done that at least 7 times, maybe more. Doesn't change anything, but you referred to a window glass, and I don't see any glass there.
Well, can you point me to the Cyan ROS window outer glass. I thought I cleaned everything thoroughly, but don't know what the ROS window outer glass is or where to find it on any printer, let alone this 6605.
All colors print fine, as well as black. Except for cyan. The left 80% of the page (all lines) prints just fine, but there is a fade out for the last 20% of each line. Drum replaced twice. Transfer roller replaced. Toner replaced twice.
A tech told me to replace the transfer belt (My $270, not his). However, all the other colors transfer fine, and the cyan transfers except for the right 20% which transfers at about 50% of the color density it should.
Hopefully someone here can help. I've spent days and $$$ so far.
This is a Workcentre 6605 DNI.
I will load a copy of a page if I can figure out how to do so.
The best I could do was a .jpg photo. Hope that works.
It shows up fine in my edit, but not in the post, so I'm trying another way: