cancel
Showing results for 
Search instead for 
Did you mean: 
17 Replies

Re: Cyan/ faded streaks on prints

So I think I cleaned it up a bit I'm not getting the crazy streak (well as bright as it was) no more but now getting those yellow drops I'm wondering if it's the yellow developer or magenta I'll try the yellow developer unit (which I bougth a new one) 

 

0 Kudos

Re: Cyan/ faded streaks on prints

The magenta developer unit20181218_184916.jpg

 

 

 

0 Kudos

Re: Cyan/ faded streaks on prints

Wow OK how would I know if its debris will take a shot and let you see
0 Kudos
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Cyan/ faded streaks on prints

On the last images it looks like missing magenta, so sorry that I insist but I think it is a debris in magenta developer housing that make the magnetic brush not be uniform.

0 Kudos

Re: Cyan/ faded streaks on prints

We changed the magenta housing. So think should change the yellow. And see how that goes
0 Kudos
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Cyan/ faded streaks on prints

Check te Yellow and Magenta developer housings.

0 Kudos

Re: Cyan/ faded streaks on prints

Issue still there in fact for a while seemed to have disappeared

we were getting multiple ines, faded, ut multiple magenta lines

we sorted that out with the drum

but now getting this yellow/clear line on prints

see photo

 

20181217_195142.jpg

0 Kudos

Re: Cyan/ faded streaks on prints

I switched the drums around and ran the drum test file sent. 

The Black seems ok. 

Ironically enough that's the only drum I ordered. 

I used an old drum in place of the magenta and yellow and the problem still persists. 

20181216_214816.jpg20181216_214823.jpg20181216_214833.jpg20181216_214841.jpg

0 Kudos

Re: Cyan/ faded streaks on prints

We cleaned the laser and the Ross unit. Wasn't even that dirty. Still getting the stuff on it
0 Kudos
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Cyan/ faded streaks on prints

Take out the yellow developer housing cover to see if it is a line on the magnetic rolller. This means it is a debris on developer. 

If not, it is possible to have a dirty Laser window. To see this take out the drums,drums cariadge, extend the transport cariadge, take out the IBT assy and with a light look better at the Laser's windows and if you see some dirty clean it with a linth free cloth.

0 Kudos