cancel
Showing results for 
Search instead for 
Did you mean: 
Serpico
New Member
New Member

Disable Configuration Report printing on startup

Jump to solution
Product Name: Xerox B205 Multifunction Printer
Operating System: macOS 10.13 - High Sierra

Just purchased this printer but every time I turn it on it prints a Configuration report. Cannot work out how to disable that function. Can anyone offer any advise?

0 Kudos
4 Replies
Serpico
New Member
New Member

Re: Disable Configuration Report printing on startup

Jump to solution

Photo on 08-06-2021 at 14.52.jpgHere is a photo of what I mean.

0 Kudos
Serpico
New Member
New Member

Re: Disable Configuration Report printing on startup

Jump to solution

OK. I have managed to find out myself how to do it. For the benefit of anyone else who encounters the same problem  here is what you need to do. Start by pushing the information button on the printer, the one that has the square symbol with the letter i in it then follow the instructions below.

 

It can be done at the printer via Machine Status > System Setup > OK >  Machine Setup > OK > Configuration Page > OK > OFF > OK > Stop

Serpico
New Member
New Member

Re: Disable Configuration Report printing on startup

Jump to solution

It works.

0 Kudos
RobSwan
New Member
New Member

Re: Disable Configuration Report printing on startup

Jump to solution

I have the same problem, but with a new B210 which doesn't have a display. I found some hints online that I need to get into the setup via IP address, but my browsers don't take me there. All say "took too long" - I find it really bizarre 30 years after I bought my first printer that this one prints an unwanted page each time you switch it on, and apparently all Xerox printers are so stupid. I wish I had known before... anyone can help?

0 Kudos