I have a Docucolor 3535 copier/printer that I bought new in 2003. i have used it for about 60,000 prints over it's life time.
Currently I cannot get my imac running mac 10.6.4 to print to it.
The Printer ip settings are set to DHCP as is the internal router at my office. It has a internal ip address assigned to it by the router as does all my macs.
I have installed the PS driver for the 3535 and it will not print. Also went to EFI's site for 10.6 drivers and such that i did download and install.
The print dialogue says "copying to printer".
Is there something I am missing?
Are you using the bustled Fiery, or the External Fiery?
The bustled Fiery will be attached to the back of the machine, the External is standalone.
if i'm correct you needed to install the patch for 10.6, then it works... For 10.7 and 10.8 however the only workaround that works for me is to install the PPD and print to a PS-file using that driver and then importing the PS-file into Fiery Workstation 4. That works like a charm :-) i even profiled the printer that way using X-rite from my 10.8 :-)
Greetings and good luck
I use DD3535 built-in fiery on mavvericks 10.9.5 without problem. Install printer with IP static, LPD, port 9100 and add xerox 3535 ps.ppd
I will go to install el capitan