cancel
Showing results for 
Search instead for 
Did you mean: 
digitalprintplus Valued Member
Valued Member

Faded printing red mainly affected

Product Name: Xerox Color C75 EFI Fiery Controller
Operating System: Windows 7
Getting a faded print. I'm on mobile so can't upload now but will do.

Getting faded prints mainly in red and would run through all prints.
Also some black toner spots like wasted toner.
0 Kudos
10 Replies
gabiene Frequent Advisor
Frequent Advisor

Re: Faded printing red mainly affected

Check magenta developer housing and IBT cleaner.

0 Kudos
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

OK. But there's a line in the paper think might be the rollers in the IBT or not really?
I will get the magenta and try get the blade.
Thanks
0 Kudos
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

colour-variation-image.jpg

0 Kudos
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

ange those two still having same issues plus black spot like waste toner on prints

these are two of the latest photos

red-faded-1.jpgred-faded.jpg

0 Kudos
gabiene Frequent Advisor
Frequent Advisor

Re: Faded printing red mainly affected

It looks like the Magenta Ros (laser) window is dirty.

0 Kudos
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

Already cleaned it but will try again

 

and the little waste toner dots, we found that some toner had spilled under the deverloper unit of the black developer we cleaned it was good for a while then started happening again

 

0 Kudos
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

Cleaned the Ross (laser) units, all 4 in fact.

still same

take a look at the image same-faded-red.jpg

 

0 Kudos
Highlighted
digitalprintplus Valued Member
Valued Member

Re: Faded printing red mainly affected

Got a teechnician come in and di a much better job

still a bit faded

How does one take out the Ross unit?

0 Kudos
gabiene Frequent Advisor
Frequent Advisor

Re: Faded printing red mainly affected

The tech will know how. Is not quiet simple but you can assist him. The laser units must be cleaned also inside, not just outside as I supposed you did it.

Good luck!

Gabi

0 Kudos