cancel
Showing results for 
Search instead for 
Did you mean: 

Fiery Command Workstation will not recognize IP of Xerox C60

Jump to solution
Operating System: Windows 10
Windows 10 64 bit, Xerox Color C60, Fiery Command Workstation - I have two Xerox C60's. FCW immediately discovered the IP for Xerox #1 and I have no problems printing to it.

 

If I use Xerox Centreware Internet Services (type in IP ibn browser window) I can access and print to machine. When I attempt to add printer via FCW - it says IP address invalid. I do advanced search, no valid IPs are found. As far as I can tell both machines are set up similarly.

 

However in machine display, Xerox #1 has Fiery as a selection, Xerox #2 does not.

0 Kudos
3 Replies
JudySolo-Xerox
Community Manager
Community Manager

Re: Fiery Command Workstation will not recognize IP of Xerox C60

Jump to solution

Hello,

I see no one has responded to this post yet. So, at this point I would recommend contacting your local Xerox Support Department to speak with a Product Specialist for more assistance. Please call 1-800-821-2797 or 1-800-835-6100. 

Thanks,
JudySolo-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!
MRCAnalyst
FreeFlow User

Re: Fiery Command Workstation will not recognize IP of Xerox C60

Jump to solution

If you enter the IP of #2 into a browser and it goes directly to CentreWare then you aren't connecting through a Fiery. It sounds like you do not have a Fiery controller on your second C60 because the Fiery icon is not displayed on the panel. Those machines do have internal controllers and can be used without a Fiery. If you are sure that you have a Fiery, either the external tower computer or "integrated" unit attached to the back, it seems like it is not connected and in use.

0 Kudos

Re: Fiery Command Workstation will not recognize IP of Xerox C60

Jump to solution

I think you nailed it. The printer that I can reach via FCW has a silver box attached to the rear, and the other doesn't. Problem solved! Thank you!

0 Kudos