first of all make sure that you securely connected the two ethernet cables on the right locations
one between the fiery and the printer and the other one between the fiery and your network
Then press Login/Out button >Login ID is “admin” & Passcode is “1111” >Tools > System Settings >Connectivity and Network Setup > Protocol Settings
Apply All these settings then save it then logout from the admin mode and the machine will reboot
then go to the PC and from the web browser type the IP address of the fiery
the fiery web tools page will open Now click on the bottom right“Xerox Centreware” link to go to the printer web page .
from there go to Properties and use the same user name and password which you use in the first time
Connectivity> Protocols> TCPIP > “ DNS Configuration”
and apply these settings then press ok and the machine will reboot
Please select "Accept Solution" and or select the Kudos for posts that may resolve your issues.
I have got Xerox 550 printer, and apparently the fiery is not connecting to my computer i have brought in diffrent computers to give it a go but its not connecting at all, please help me if some one could help me will most appreciate.