HOW TO CONNECT WC 7335 TO PC WITH NETWORK CABLE FOR PRINTING

[suksnts]

Thanks for the solution it worked............

[Mohammad_armouti · Accepted solution]

Hi suksnts

If you want a cable to connect your computer and printer together directly , you need a crossover cable. If you have several computers and one printer, you need a switch. All of the computers will connect to the switch with a straight through cable and your printer would also connect to the switch with a straight through cable.

Please select "Accept Solution" and or select the  Kudos for posts that may resolve your issues.

Regards !

[suksnts]

WHAT WOULD BE THE TYPE OF NETWORK CABE (CROSS TYPE OR STRAIGHT TYPE CAT65 CABLE)

[Mohammad_armouti]

Hi suksnts

make sure that your printer is connected by a network cable to your network then you need to set it up as DHCP to know the IP Address range after that note what is the IP Adress ,Subnet Mask, Gateway wich the printer automaticlly detect and  you need then to convert from DHCP TO STATIC 

check this guide   Quick Network Setup Guide to show you how to do that

then go here to install the print driver to your PC

and then check this guide Installation Procedure for Windows 10 

Regards,

[Master_hamid]

Watch this video 

https://youtu.be/JdWXYOZU8KE

[suksnts]

Need help how to configure network setting for printing from desktop on windows 10

what will be ip setting how will i able to print from pc